HSM1012T12
(1.28 gpf/4.8 Lpf) FLOOR MOUNT HET AUTOMATIC FLUSH VALVE SYSTEM
DESCRIPTION
Battery Powered, Sensor Operated HYBRIDFLUSH
®
Side Mount
Complete HET System with Exposed Automatic Water Closet
Flushometer and Vitreous China Fixture.
FLUSH CYCLE
Model HSM1012T12 (1.28 gpf/4.8 Lpf) High Efficiency
FLUSHOMETER SPECIFICATION (HSM-801-CT-12)
- Patented Gear Motor Drive
- Hands Free Infrared Sensor Activation
- Vandal and Water Resistant Design
- Chrome Plated Metal Housing
- Quiet Operation
- Electronic Manual Flush Button (Front)
- True Mechanical Manual Flush Button (Side)
*Mechanical Button Works When Batteries are Drained
- Operates on (4) “C” Alkaline Batteries (Included)
- Battery Life - 3+ Years
- “Low Battery” Blinking LED Indicator
- Easy Battery Replacement-No Water Shut Off Necessary
- Adjustable Sensor Distance
- Optional Three (3) Second Flush Delay Mode
- Optional 24-Hour Flush Mode
- Uses Proprietary Silicone Diaphragm with Filtered Bypass
- 1” I.P.S. Angle Stop
- Adjustable Tailpiece
- High Back Pressure Vacuum Breaker with Single Piece
Hex Coupling Nut
- Spud Coupling and Flange for 1 ½” Top Spud
- Sweat Solder Kit and Wall Flange with Set Screw
- High Efficiency For Water Conservation
CODE COMPLIANCE (LISTED BY IAPMO)
- ASSE 1037-2015
- ASME A112.1035-2015
- CSA B125.37-15
W
a
rra
nty
5 Years
L
iste
d
By
I
APM
O
TECHNICAL DOWNLOADS
Specifications
- HSM1012T12
FIXTURE SPECIFICATION (AUT-1012)
- White Color
- Vitreous China
- Floor Mount Water Closet Bowl
- Elongated Rim
- 10” (254mm) Rough-In
- 1-1/2” (38mm) I.P.S. Top Spud Inlet
- 2” (50mm) Fully Glazed Trapway
- 11” (279mm) x 13” (330mm) Water Surface Area
- Direct Feed Jet
- 100% Factory Tested
- Toilet Seat Not Included
CODE COMPLIANCE (LISTED BY ICC-ES)
- ASME A112.19.2-2013
- CSA B45.1-13
- EPA WaterSense
PLUMBING SYSTEM REQUIREMENTS
- Minimum Flowing Pressure: 25 PSI
- Maximum Static Pressure: 80 PSI
- Minimum Flow Rate: 25 GPM
Copyright © 2023 Advanced Modern Technologies Corporation. All rights reserved.