Copyright © 2016 Advanced Modern Technologies Corporation. All rights reserved.
MF1012WT16DF (1.6 gpf/6.0 Lpf and 1.1 gpf/4.2 Lpf) DUAL-FLUSH ADA WALL HUNG MANUAL FLUSH VALVE SYSTEM
DESCRIPTION Complete DUAL-FLUSH System with Exposed Manual Water Closet Flushometer and ADA Vitreous China Fixture.
FLUSH CYCLES Model MF1012WT16DF (1.6 gpf/6.0 Lpf and 1.1 gpf/ 4.2Lpf) High Efficiency
FLUSHOMETER SPECIFICATION (MF-700-DFT16) - Green Solution - Reduces Water Usage Per Flush When Pushed DOWN - Lift Handle UP for Solid Waste and Push Handle DOWN for Liquid Waste - Reduces Water Usage by up to 30% when Pushed DOWNWARDS - No Behavioral Change Required By Users To Start Saving Water - Quiet Operation - Uses Proprietary Silicone Diaphragm with Filtered Bypass - ADA Compliant Non-Hold Open Sealed Brass Handle - 1” I.P.S. Angle Stop - Adjustable Tailpiece - High Back Pressure Vacuum Breaker with Single Piece   Hex Coupling Nut - Spud Coupling and Flange for 1 ½” Top Spud - Sweat Solder Kit and Wall Flange with Set Screw - No External Water Volume Adjustment - High Efficiency For Water Conservation
CODE COMPLIANCE (LISTED BY IAPMO) - ASSE 1037-2015 - ASME A112.1035-2015 - CSA B125.37-15
W a rra nty
  5 Years
L iste d
By
I APM O
TECHNICAL DOWNLOADS
Specifications - MF1012WT16DF
FIXTURE SPECIFICATION (AUT-1012W) - Complies with ADA Accessible Standards - White Color - Vitreous China - Wall Hung Water Closet Bowl - Elongated Rim - 1-1/2” (38mm) I.P.S. Top Spud Inlet - 2” (50mm) Fully Glazed Trapway - 7-1/2” (190mm) x 8-1/2” (216mm) Water Surface Area - Direct Feed Jet - 100% Factory Tested - Toilet Seat Not Included
CODE COMPLIANCE (LISTED BY ICC-ES) - ASME A112.19.2-2013 - CSA B45.1-13
PLUMBING SYSTEM REQUIREMENTS - Minimum Flowing Pressure: 25 PSI - Maximum Static Pressure: 80 PSI - Minimum Flow Rate: 25 GPM
A D A  C om plia nt
AMTC Advanced Modern Technologies Corporation