AEFWB1012T11 (1.1 gpf/4.2 Lpf) FLOOR MOUNT HET WALL BOX CONCEALED AUTOMATIC FLUSH VALVE SYSTEM
DESCRIPTION Hardwired, Sensor Operated HYBRIDFLUSH ® Top Mount Complete HET System with Wall Box Concealed Automatic Water Closet Flushometer and Vitreous China Fixture.
FLUSH CYCLE Model AEFWB1012T11 (1.1 gpf/4.2 Lpf) High Efficiency
FLUSHOMETER SPECIFICATION (AEF-801-WBCCT-11) - Patented BRV ® and Gear Motor Drive - Wall Box Plate with Sensor - Hands Free Infrared Sensor Activation - Vandal and Water Resistant Design - Chrome Plated All Metal Housing - Quiet Operation - Electronic Flush Button - Operates on 6-Volt DC Power (Transformer Sold Separately) - Adjustable Sensor Distance - Optional Three (3) Second Flush Delay Mode - Optional 24-Hour Flush Mode - Uses Proprietary Silicone Diaphragm with Filtered Bypass - 1” I.P.S. Angle Stop - Adjustable Tailpiece - High Back Pressure Vacuum Breaker with Single Piece Hex Coupling Nut - Spud Coupling and Flange for 1 ½” Top Spud - Sweat Solder Kit and Wall Flange with Set Screw - High Efficiency For Water Conservation
CODE COMPLIANCE (LISTED BY IAPMO) - ASSE 1037-2015 - ASME A112.1035-2015 - CSA B125.37-15
W a rra nty
5 Years
L iste d
By
I APM O
TECHNICAL DOWNLOADS
FIXTURE SPECIFICATION (AUT-1012) - White Color - Vitreous China - Floor Mount Water Closet Bowl - Elongated Rim - 10” (254mm) Rough-In - 1-1/2” (38mm) I.P.S. Top Spud Inlet - 2” (50mm) Fully Glazed Trapway - 11” (279mm) x 13” (330mm) Water Surface Area - Direct Feed Jet - 100% Factory Tested - Toilet Seat Not Included
CODE COMPLIANCE (LISTED BY ICC-ES) - ASME A112.19.2-2013 - CSA B45.1-13 - EPA WaterSense
PLUMBING SYSTEM REQUIREMENTS - Minimum Flowing Pressure: 25 PSI - Maximum Static Pressure: 80 PSI - Minimum Flow Rate: 25 GPM
Copyright © 2023 Advanced Modern Technologies Corporation. All rights reserved.
Follow Us
 Search  Search